Dissapointed..

[defenderben]

I must agree I did not know what coke was until I got a Deus too...but after about half a dozen lumps you know what it sounds like and the iffy Id around 28 -32 so never dig it. Or go with your mate with an Etrac if he cannot get a signal its coke, if he gets a signal it is a diggable target..

Attended a rally up Axminster a few weeks ago and this method of buddying up with a minelab worked well as roman coins were comming out at 38 on the Deus and sounded a bit cokey...so got a minelab to help out

Ben

[Andy Thomas]

Have dug coke quite a few times with me se

[roman bobby]

Hi guys,I've been reading with interest some of your quotes regarding this new ctx 3030,to me the thing about buying any new detector is your looking for one thats better than the one you already have,and secondly hopefully one than can pick out targets that other machines have missed,lets be honest thats the bottom line,so if this detector can't do this,your mabye better sticking with the one you already have.

[lancastrian]

ctx 3030 i never dig iron,coke,musket ball and lead

[seanmagee1]

hi lancastrian, i agree with the iron and coke bit but if your not digging musket balls or lead then your missing shedloads of good signals!!

[lancastrian]

its america default setting i try cut down discm but i still dont know how to adjust them that why i dont dig balls leads i need help

[fertler]

its america default setting i try cut down discm but i still dont know how to adjust them that why i dont dig balls leads i need help

Hi Lancastrian! As you are in the jolly old UK - why are you using America defaults? Just askin' I don't have a CTX yet! I assume that you have looked in the CTX part of the forum? I'm sure that I've seen items here and there.
Barrie.

[lancastrian]

Hi Lancastrian! As you are in the jolly old UK - why are you using America defaults? Just askin' I don't have a CTX yet! I assume that you have looked in the CTX part of the forum? I'm sure that I've seen items here and there.
Barrie.

i dont touch or change patten,tones yet its america default not uk or european when i change back to xp adx 250 i found leads,m.balls alots. ctx missed i fellow on same footprint ! that why iffy too much make easy confused thought its iron or coke

[fertler]

i dont touch or change patten,tones yet its america default not uk or european when i change back to xp adx 250 i found leads,m.balls alots. ctx missed i fellow on same footprint ! that why iffy too much make easy confused thought its iron or coke

Hi again Lancastrian! You've got to do some changes on your CTX! There is no point in having a fully adjustable machine if you are not going to adjust it. Like buying a new computer - if you just switch it on all you will see will be the desktop - probably with a web browser and nothing else!
Look in the forum and find at least one of the "user-recommended" programs and have a go! You can always restore the factory defaults easily but you'll have to look at the instruction book....... As I do not have a CTX yet, I can only suggest the above but it is dead easy to do on the Etrac - even for a 75 year old
If you give up on the CTX, I can offer you £50 + postage for it!

Good hunting - Barrie.

P.S. My Dad was born in Lancaster and lived for a good many years in Bolton.

[lancastrian]

i am still in learn about ctx 3030 i wont give up yet i am look for pasture deep i saw tomb`s video look good. i download terra firma`s i will try this one day and will try me own to rid of firm default.